790104 Wheel Spacer Set 10 mm with Wheel Bolts

NJT aluminium wheel spacers 10 mm including wheel bolts with ABE Wheel spacer set – 10 mm per axle (5 mm per side) – without centring – bolt circle (LK) 4 x 100 / 4 x 108 – hub hole (NLB) 57.1 mm – 8 x wheel bolts taper collar M12 x 1.5 30 mm suitable for: BMW: E30 (3/A, 3/R, 3/1). - all NJT Extremely track plates are made of high-strength aluminium - additionally anodised so that the rust has no chance - with ABE (valid for the wheel/tyre combinations registered in the ABE) calculation of the required wheel bolt length: - Measure shaft length of the original wheel bolt in mm - add the width of the track plate to the length of the original shaft length - example: original shaft length 25 mm + 5 mm track plate. (each side) = 30 mm length of the wheel bolt - check whether the wheel bolts with ball or cone collar are required

• Suitable for BMW E30 (3/A, 3/R, 3/1)
• Wheel spacer set, 10 mm per axle (5 mm per side), without centring, bolt circle (LK) 4 x 100 / 4 x 108, hub hole (NLB) 57.1 mm, 8x wheel bolts, taper seat, M12 x 1.5, 30 mm for: BMW: E30 (3/A, 3/R, 3/1/1). )
• All NJT extreme track plates are made of high-strength aluminium
• Anodised additionally so that the rust does not stand a chance. With ABE (valid for the wheel/tyre combinations registered in the ABE)